DXC Series Integral AC Fan Air Cooler

DXC Series Integral AC Fan Air Cooler Featured Image
  • DXC Series Integral AC Fan Air Cooler
  • DXC Series Integral AC Fan Air Cooler
  • DXC Series Integral AC Fan Air Cooler
  • DXC Series Integral AC Fan Air Cooler

Short Description:

This series of products is made of aluminum alloy material with light weight, excellent anti-seismic and high heat exchange efficiency.
Structurally, fins are added to the heat pipe, which increases the heat dissipation area and accelerates the heat transfer speed.
Under the operation of the fan, the air is used as the cold source, and the heat is forcibly taken away, so that the cooling effect with low cost and high efficiency is achieved, which meets the requirements of energy saving, water saving and environmental protection.
Obviously, it is the most popular oil coolers on the market.


Product Detail

Product Tags

Features

The cooler, through vacuum brazing process, is driving by all-in-one axial flow fan which can run for a long time to achieve stable cooling effect.
1. Temperature controller can be installed.
2. A variety of pressure protection forms can be selected.
3. The oil inlet and outlet of the cooler are standard G thread, also can be customized or connected with SAE flange as required.
The outer fins are sufficient; the outer fin adopts a corrugated structure to ensure sufficient heat dissipation area and withstand voltage value.
Equipped with high-quality brand high-power and high-efficiency motors; it can be suitable for high-efficiency and long-term operation in various complex occasions.
High-quality dynamic balance correction fan blades, can run stably for a long time without deformation and durable.
The shaft sleeve is made of high-strength and high-density die-cast aluminum alloy material to prevent bursting under high-speed operation.
The aluminum radiator runner grooves of the DX series products are all made of thickened pressure-resistant B profiles. The real material is the bottom line of our industry.

Quality Assurance, Easy Installation, One Year Warranty

Features

The cooler, through vacuum brazing process, is driving by high-efficiency standard motor and high-strength fan blades to achieve stable cooling effect.
· Three-phase asynchronous motor: large rotation, good stability, continuous work for 24 hours.
· Thickened Aluminum,Vacuum Brazing Technology.
· Fast Heat Dissipation.
· Strong Winds.
· Safety at Work.
· Environmentally Friendly and Energy-saving.
· Low Noise.
· Thickened casing, spraying treatment, fine workmanship, not easy to rust.
· Temperature controller can be installed.
· A variety of pressure protection forms can be selected.
· The oil inlet and outlet of the cooler are standard G thread, also can be customized or connected with SAE flange as required.

Quality Assurance, Easy Installation, One Year Warranty

Cooling Medium

Don't corrode aluminum alloys:
① Hydraulic oil
② lubricating oil
③ Water and water-soluble liquids...
Water and Glycol Mixtures, please consult us.

Spcification

Model DXC-2 DXC-3 DXC-4 DXC-5 DXC-6 DXC-7 DXC-8 DXC-9 DXC-10 DXC-11
Cooling Capacity*
(kW)		 10 15 20 25 30 40 50 60 70 80
Rated Flow
(L/min)		 80 100 150 200 250 300 350 400 500 600
Max.Working Pressure
(bar)		 20 20 20 20 20 20 20 20 20 20
Fan Power
(W)		 50/55 129/129 180/180 180/180 250/250 250/250 700/780 750/800 4*129 4*180
Working Voltage                      (V) 220/380 220/380 220/380 220/380 220/380 220/380 220/380 220/380 220/380 220/380
Inlet&Outlet Thread   G¾"  G1"  G1¼"  G1¼"  G1¼"  G1¼"  G1½"  G1½"  G1½"  G1½"
Thermometric Thread  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"  G3/8"
Noise Level**                 （dB） 58 62 71 72 74 76 80 83 86 89
A
(mm±5)		 365 425 530 585 630 630 750 835 970 1080
B
(mm±5)		 400 500 565 600 625 625 765 920 1060 1205
C
(mm±2)		 250 250 260 300 300 330 400 400 400 400
D
(mm±2)		 230 290 390 450 490 490 560 645 700 700
E
(mm±2)		 210 210 220 260 260 280 350 350 350 350
F
(mm±5)		 295 384 434 475 495 495 634 780 920 1070
G
(mm±5)		 45 50 55 55 55 55 55 60 60 60
K
(mm±10)		 240 280 310 330 330 350 390 465 380 400
L
(mm±2)		 40 40 40 40 45 45 45 50 50 50
M
(mm±2)		 12*18 12*18 12*18 12*18 14*22 14*22 14*22 14*22 14*22 14*22
W1 180 200 250 300 300 300 350 400 450 500
W2 360 400 500 600 600 700 800 900 1000 650
Note：   * Cooling capacity: cooling power at △T=40℃.
             ** The noise value is measured at a distance of 1m from the cooler, which is only for reference.
                  Because it is affected by the surrounding environment, medium viscosity and reflection.
            *** This table only takes AC380V-50HZ as an example.
           **** Motor power protection level: IP44; Insulation class: F; CE standard.
                 (Other options please contact DONGXU)

Dimensions

qgqw3
wfq

Application

Hydraulic system circuit, independent cooling circuit and lubricating oil cooling system.
For examples, machine tools, mining machinery, hydraulic machinery, power station, wind power equipment, and so on.

① Machine tools

Machine tools

hydraulic machinery

Hydraulic Machinery

⑦ Lubrication systems

Lubrication systems

power station

Power Station

Description Of Model Label

DXC 8 A3 5 N C X O O
Cooler Type：
Integral AC fan Series		 Plate Size：
2/3/4/5/6/7/8/9/10/11		 Voltage：
A2=AC220V
A3=AC380V		 Frequency：
5=50Hz⬅Standard
6=60Hz		 Bypass Valve：
N=Build-in⬅Standard
W=External
M=Without Bypass Valve		 Oil Hole Direction：
C=Side in side out⬅Standard
S=Up in up out		 Wind Direction:
X=Suction⬅Standard
C=Blowing		 Temp. Controller:
O=Without controller⬅Standard
T=Temp. Switches--Action Temp.:
    T50=50℃，T60=60℃，T70=70℃
C=Temp. Transmitter--
    C1=Compact，C2=Digital		 Heatsink Protection：
O=Without protection⬅Standard
S=Anti-Stone net
C=Dust net
  • Previous:
  • Next:

    • Products categories