DXS Series Special for Mining Cone Crusher Air Cooler

DXS Series Special for Mining Cone Crusher Air Cooler Featured Image
  • DXS Series Special for Mining Cone Crusher Air Cooler
  • DXS Series Special for Mining Cone Crusher Air Cooler
  • DXS Series Special for Mining Cone Crusher Air Cooler
  • DXS Series Special for Mining Cone Crusher Air Cooler

Short Description:

The lubricating system required by the hydraulic cone crusher is very high. The temperature control of the oil must be kept below 45-50 degrees. Long-term operation of the drive motor generates huge energy for the heat loss of the wear surface. At this time, the oil in the lubricating system acts as a carrier. The continuous circulation of the lubricating oil can continuously take away the heat generated by the equipment. When the heat is carried out by the oil, install a corresponding matching air oil cooler on the way back to the tank, so that the heat from the oil can be unloaded perfectly, and the lubrication system can continue to operate to ensure that the crusher works for a long time without consuming equipment. In order to keep pace with the never-ending demands of customers, we are involved into offering wide range of Air Oil Cooler.


Product Detail

Product Tags

Features

The cooler, through vacuum brazing process, is driving by high-efficiency standard motor and high-strength fan blades to achieve stable cooling effect.
Besides,round shape design house appearance is more suitable for mining condition.
· Temperature controller can be selected.
· A variety of pressure protection forms can be selected.
· The oil inlet and outlet of the cooler are standard G thread, also can be customized or connected with SAE flange as required.

The purpose of the air cooler is that when the hydraulic system is working, almost all the energy consumed due to the volume and mechanical losses of the hydraulic pump and hydraulic motor,
the pressure loss of the control element and the pipeline and the friction loss of the liquid is converted into heat, resulting in the oil temperature.
Excessive oil viscosity decreases and component leakage increases, resulting in faster wear.
At this time, the air cooler needs to be cooled to reduce the oil temperature to the working temperature to ensure that the system can continue to operate normally, so that the work can be carried out smoothly.

Spcification

Model DXS-8 DXS-9 DXS-10 DXS-11 DXS-12 DXS-8L DXS-9L DXS-10L
Cooling Capacity*
(kW)		 60 76 97 115 130 51 64 85
Rated Flow
(L/min)		 300 350 400 500 600 300 350 400
Max.Working Pressure
(bar)		 20 20 20 20 20 20 20 20
Fan Power
(kW)		 3 4 7.5 4 5.5 1.5 2.2 3
Blade speed
（r/min）		 1450 1450 1450 980 980 980 980 980
Max.Oil Temp.
(℃)		 130 130 130 130 130 130 130 130
Inlet&Outlet Thread  G1¼''  G1½''  G1½''  G1½''  G1½''  G1½''  G1½''  G1½''
Thermometric Thread  G3/8''  G3/8''  G3/8''  G3/8''  G3/8''  G3/8''  G3/8''  G3/8''
Noise Level**
（dB）		 96 98 105 86 95 78 80 83
A
(mm±10)		 790 922 1042 1272 1410 790 922 1042
B
(mm±10)		 908 976 1119 1265 1445 908 976 1119
C
(mm±5)		 500 500 500 500 500 500 500 500
D
(mm±10)		 549 570 670 790 910 549 570 670
E
(mm±5)		 110 110 110 110 110 110 110 110
H
(mm±5)		 195 195 195 195 195 195 195 195
F
(mm±5)		 590 634 780 920 1070 590 634 780
G
(mm±5)		 180 210 204 206 224 180 210 204
K
(mm±10)		 680 945 1027 1196 1350      
M
(mm±2)		 18*28 18*28 18*28 18*28 18*28 18*28 18*28 18*28
L
(mm±2)		 60 60 60 60 60 60 60 60
W1 400 500 620 400 600 250 400 400
W2 800 1000 1250 800 1200 500 800 800
Note：   * Cooling capacity: cooling power at △T=40℃.
             ** The noise value is measured at a distance of 1m from the cooler, which is only for reference.
                  Because it is affected by the surrounding environment, medium viscosity and reflection.
            *** This table only takes AC380V-50HZ as an example.
           **** Motor grade: Energy consumption grade YE2, protection grade IP55, insulation grade F.
                 (Other options please contact DONGXU)

Dimensions

DXS Specification

Application

Independent cooling circuit,and lubricating oil cooling system.
For examples,mining cone crusher，mining machinery,lubrication system, and so on.

lubrication system

Lubrication system

mining cone crusher

Mining cone crusher

mining machinery

Mining machinery

Description Of Model Label

DXS 8 A3 5 N C X O O
Cooler Type：
Mine Cone Crusher Special Series		 Plate Size：
8/9/10/11/12/8L/9L/10L		 Voltage：
A3=AC380V⬅Standard
A4=AC440V
A5=AC660V		 Frequency：
5=50Hz⬅Standard
6=60Hz		 Bypass Valve：
N=Build-in⬅Standard
W=External
M=Without Bypass Valve		 Oil Hole Direction：
C=Side in side out⬅Standard
S=Up in up out		 Wind Direction:
X=Suction⬅Standard
C=Blowing		 Temp. Controller:
O=Without controller⬅Standard
T=Temp. Switches--Action Temp.:
    T50=50℃，T60=60℃，T70=70℃
C=Temp. Transmitter--
    C1=Compact，C2=Digital		 Heatsink Protection：
O=Without protection⬅Standard
S=Anti-Stone net
  • Previous:
  • Next:

    • Products categories