Industrial oil cooler
Oil cooler installation environment
The oil cooler should be installed in a well-ventilated and clean air environment. There should be no corrosive gas, flammable and explosive and other dangerous goods around, and there should be no high temperature heat source and other heating objects near the installation location. At the same time, avoid direct sunlight on the body (especially the electrical box).
If it is installed outdoors, corresponding rainproof measures should be taken (mainly the rainproof of the electrical box and operation panel).
Oil cooler installation foundation
The structure of the installation foundation should be able to fully withstand the total amount of oil coolers, and the horizontal inclination angle of the foundation should not be greater than 5°.
Warning: It is strictly forbidden to install the oil cooler on a foundation with vibration or shaking, otherwise it may cause the internal pipeline of the oil cooler to crack.
The case of the oil cooler
Hydraulic Press:
Deep Hole Drill:
Wind Power Station Hydraulic System:
High Speed Turret Punch:
CNC Cutting Machine:
Horizontal Boring Machine:
Post time: Nov-11-2022