Labarun Fasaha｜Tsarin da Halayen Plate-fin Heat Exchanger

Jiangsu HELIKE Fluid Technology Co., Ltd. reshen ne na Dongxu Hydraulics.Yana da ƙwarewa a cikin bincike da haɓakawa, ƙira, samarwa da tallace-tallace na aluminum farantin-fin zafi musayar.
Plate-fin Heat Exchanger
Abu:aluminum gami
 
Matsakaicin matsi na aiki da aka yarda:20bar (nau'in AJ0510: 8bar, AJ1025 nau'in: 12bar, HLK31-70 irin: 45bar)
 
Gwajin gwaji:Sau 1.5 matsakaicin matsa lamba aiki
 
Matsakaicin zafin aiki:130°C
 
Matsalolin ruwa:wadanda ba sa amsa sinadarai tare da allunan aluminum, wadanda ke amfani da cakuda ruwa da ethylene glycol
 
l Mai sanyaya farantin-fin yana da ƙayyadaddun tsarinsa, nauyi mai sauƙi da ingantaccen canjin zafi.
 
l An haɗa tashar tashar man fetur tare da fins na ciki, kuma ciki da waje suna tabbatar da ingantaccen walƙiya da saurin zafi.Ba ya kwatankwacin hanyar bututun jan karfe.
 
l Plate-fin coolers suna ba da mafi kyawun ƙarfin musanya kowace raka'a idan aka kwatanta da bututun jan ƙarfe na gargajiya ko wasu nau'ikan musayar zafi.Aƙalla sau 10-20 na inganci na nau'in bututun jan ƙarfe na gargajiya.

Tsari da Halaye
Farantin fin shine ainihin kashi (tsarin canja wurin zafi: zafin zafi na fin da canja wurin zafi kai tsaye tsakanin fin da ruwa)
 
Wuraren zafi na asali: bakin ciki (mai kyau canja wurin zafi), babba (yankin na biyu), ƙaramin farar (m, matsa lamba, mai sauƙi

Fin Canja wurin zafi

Siffofin Nau'ikan Fins Daban-daban

 
Rufin Rufewa

Rubutun rufewa suna kewaye da kowane Layer don raba matsakaici daga duniyar waje.

Nau'o'in sashe na filayen da aka saba amfani da su.

Nau'in dubawa a ƙarshen tsiri na hatimi (tsayi).
 
RarrabaBbaka
1. Abun Haɗawa: Ƙarfe Haɗaɗɗen Panel
2. Aiki:
(1) Ruwan ruwa daban
(2) Haɗaɗɗen ƙarfe mai cike da brazing
An lulluɓe shi da wani nau'in allo na brazing (Al-Si-Mg) a saman ƙarfen mahaifa, kuma gawa yana narkewa yayin brazing don walda fins, hatimi da faranti na ƙarfe zuwa ɗaya.
3. Yawan amfani partitions ne kullum 1mm ~ 2mm kauri.

Deflector
1. Aiki: jagorar shigo da ruwa da fitarwa.
2. An yi shi ta hanyar yanke da fins.
3. Gabaɗaya yi amfani da babban farar (gudanar ruwa) kamar 4.2mm.
4. Gabaɗaya yi amfani da kauri mai girma (mai ɗaukar nauyi) kamar 0.55mm.
5. Nau'in porous don amfanin gabaɗaya (gudanar ruwa).
 
Na musammanCkasa
Dangane da nisa na dam ɗin farantin da wurin buɗewa da buɗewar jagorar difloma a cikin dam ɗin farantin, gabaɗaya akwai nau'ikan nau'ikan nau'ikan nau'ikan nau'ikan daban-daban kamar yadda aka nuna a cikin hoton da ke ƙasa.

PlateBkasaBody
Jikin damfaran farantin shine wurin musayar zafi kuma shine babban ɓangaren na'urar musayar zafi.
Rukunin tsarin shine Layer (tashar).Kowane Layer yana kunshe ne da ƙwanƙwasa, fins, like da partitions.Dangane da buƙatun canja wurin zafi, ana tattara faranti tare don samar da tarin farantin.Duk jikin daurin farantin yana da ƙura kuma ba za a iya tarwatsewa ba.Ana nuna tsarin Layer a cikin hoton da ke ƙasa.

Siffofin
1. Magudanan ruwa da yawa.
2. Ana iya zana shi a tsakiya (zazzabi daban-daban).
3. Ana iya shirya mashigin mai gudu da mashigar a kowane bangare.
 
Foshan Nanhai Dongxu Hydraulic Machinery Co., Ltd. yana da rassa uku: Jiangsu Helike Fluid Technology Co., Ltd., Guangdong Kaidun Fluid Transmission Co., Ltd., da Guangdong Bokade Radiator Material Co., Ltd.
Kamfanin riko na Foshan Nanhai Dongxu na'ura mai aiki da karfin ruwa Machinery Co., Ltd.: Ningbo Fenghua No. 3 na'ura mai aiki da karfin ruwa Parts Factory, da dai sauransu.
 
Dongxu Hydraulic Machinery Co., Ltd&Jiangsu Helike Fluid Technology Co., Ltd.
MAIL:  Jaemo@fsdxyy.com
Yanar Gizo: www.dxhydraulics.com
WHATSAPP/SKYPE/TEL/WECHAT: +86 139-2992-3909
Ƙara: No.11, Hanya Bakwai, Lianhe Industrial Park, Foshan City, Lardin Guangdong, Sin, 528226& No. 7 Xingye Road, Zhuxi Masana'antu Concentration, Zhoutie Town, Yixing City, Lardin Jiangsu, Sin