Air coolers are commonly used to provide effective cooling in a variety of applications ranging from household appliances to industrial processes. However, air coolers, like any other cooling system, can suffer from airlock issues, resulting in reduced cooling efficiency. In this article, we’ll discuss how to remove air from your air cooler’s cooling system and restore its peak performance.
Air locks can occur in an air cooler for several reasons, such as improper installation, trapped air in the water pump or pipes, or air buildup in the cooling pad. When an airlock is present, the air cooler may not provide enough cooling, and you may notice reduced airflow or leaks. To resolve this issue, follow these steps:
1. Turn off the air cooler and unplug the power cord. This is essential to ensure your safety during troubleshooting.
2. Locate the water filling cap or water inlet valve. Open it to relieve the pressure built up in the cooling system. Let the air escape for a few seconds, or until you no longer hear any hissing.
3. Check the water level in the water tank. Make sure it is neither too low nor overflowing. Adjust the water level accordingly and close the fill cap or valve.
4. Locate the drain plug on the bottom of the air cooler and remove it. Allow excess water to drain completely. This step also helps release any trapped air.
5. Once the system has drained properly, reinsert the drain plug and make sure it has a good seal.
6. Plug in the air cooler and turn it on. Check for signs of leaks or unusual noises.
7. Open the doors and windows of the room to promote air circulation. This will help with faster air exchange and cooling efficiency.
By following these simple steps, you can effectively eliminate air locks in your air cooler cooling system and ensure it operates optimally. Regular maintenance, such as cleaning cooling pads and replacing them when necessary, will also extend the life and efficiency of your air cooler.
If you experience any ongoing issues, or your air cooler’s cooling efficiency continues to decrease, it is recommended that you seek professional help or contact the manufacturer for assistance. They will have the necessary expertise to diagnose and resolve any complex issues with your air cooler.
Post time: Nov-23-2023