KO jerin MUTIPIPE BAFFED TUBE MUSAYIN ZAFI

Takaitaccen Bayani:

Siffofin
1. Fadin Wurin Canja Wuta
Lambar bututun cooper DONGXU sau 3 a sama fiye da nau'in bututun fin da nau'in haƙori na roll.

2. Haɓaka Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙira
An yi shi da bututun Red Coopers 100% yana tabbatar da sama da 0.95 thermal conductivity.

3. Babu Fitowar Mai
Ka guji hada ruwa da mai sannan ka wuce gwajin aikin iskar Gas kafin jigilar kaya.

Murfin ruwa ya mutu-siminti:
Ƙarfin yana haɓaka sosai, kuma hatimin yana ɗaukar hatimin NBR da aka shigo da shi, wanda zai iya hana ɗigon mai yadda ya kamata da zub da ruwa a wurin sadarwa.

Madaidaicin bututu ja mai kauri:
Mai sanyaya ruwa tubular ya ƙunshi harsashi / murfin gaba / murfin baya/jin sanyaya.
Ɗayan ƙarshen bututun yana gyarawa kuma ɗayan ƙarshen yana iyo, don haka yadda ya kamata guje wa gazawar tsarin da ke haifar da haɓakar thermal.

A3 kayan:
An yi ganga silinda da kayan A3 daga babban masana'anta, wanda ke da juriya mafi girma da aminci.

Aika mana imel

Cikakken Bayani

Tags samfurin

Daki-daki

1. Ana amfani da waldawar CNC a wurin waldawa, haɗin gwiwar walda ya fi zagaye da cikawa, kuma bayyanar ya fi kyau da dorewa.
2. Za'a iya canza shugabanci da kusurwar taro a lokacin da aka so, kuma za a iya haɗa ƙafafu kai tsaye zuwa kowane matsayi na injin uwa ko tankin mai, wanda ya dace da sauƙi.
3. Matsakaicin ruwa da fitarwa - kyakkyawan aikin rufewa, bayan sa'o'i 12 na tabbatar da matsa lamba.
4. Mai shigar da mai da fitarwa - mai kyau hatimi, ba sauƙin zubar mai ba.

Girma

Ƙayyadaddun bayanai

Samfura	A (mm)	B (mm)	C (mm)	R (mm)	D (mm)	E (mm)	H (mm)	J (mm)	K (mm)	L (mm)	M (mm)	N	X	S	F	Yawo (lpm) ku
KO-60	450	305	55	89	120	210	84	34	13	95	57	11-20 Lumbar ramukan	4-M8	3/4''	3/4''	60
KO-100	555	390	60	114	150	280	104	30	13	150	95	11-20 Lumbar ramukan	6-M8	3/4''	3/4''	100
KO-150	575	380	70	140	180	280	118	30	13	175	130	11-20 Lumbar ramukan	6-M8	1¼''	1''	150
KO-250	780	580	70	140	180	480	118	30	13	175	130	11-20 Lumbar ramukan	6-M8	1¼''	1''	250
KO-350	1175	985	70	165	180	885	118	30	13	175	130	11-20 Lumbar ramukan	6-M8	1¼''	1''	350
KO-600	1175	950	110	165	215	760	142.5	30	13	203	160	14-17 Lumbar ramukan	8-M8	2''	1¼''	600
KO-800	1700	1470	110	165	215	1280	142.5	30	13	203	160	14-17 Lumbar ramukan	8-M8	2''	1¼''	800
KO-1000	2140	1890	110	165	215	1700	142.5	30	13	203	160	14-17 Lumbar ramukan	8-M8	2''	1¼''	1000
KO-1200	2530	2270	110	165	215	2080	142.5	30	13	203	160	14-17 Lumbar ramukan	8-M8	2''	1¼''	1200

Aikace-aikace

Sabuwar babban mai sanyaya tubular mai da aka haɓaka dangane da bayanan da suka dace na duniya ya dace da tsarin lubrication na hydraulic a cikin ƙarfe, ma'adinai, masana'antar sinadarai, wutar lantarki, kayan aikin injin, masana'antar haske, robobi da sauran masana'antu don kwantar da matsakaicin aiki zuwa ƙayyadaddun zazzabi. .

Metallurgical da kuma masana'antar sinadarai

Injin Injiniya allura

Hasken Masana'antu Textiles

Amfani da aiki

1. Tushen mai sanyaya dole ne ya isa ya hana kayan aiki daga nutsewa, kuma ya kamata a sami isasshen sarari a ƙarshen murfin kwanon kwanon rufi da aka kafa.
Domin fitar da bututun bututu daga harsashi, ya kamata a shigar da kayan aiki bisa ga ƙayyadaddun hoisting.Bayan an daidaita matakin, ƙara ƙuƙumman ƙugiya don haɗa bututun shigarwa da fitarwa na matsakaicin sanyi da zafi.

2. Iskar da ke cikin rami ya kamata a ƙare kafin a fara mai sanyaya don inganta yanayin zafi.Matakan sune kamar haka:
1) Sauke matosai na huɗa a kan matsakaicin zafi da sanyi, kuma rufe bawul ɗin fitarwa na matsakaici;
2) Sannu a hankali bude bawul ɗin shigar ruwa na matsakaicin zafi da sanyi har sai matsakaicin zafi da sanyi ya malalo daga iskar iska, sannan a danne filogin iska sannan a rufe bawul ɗin shigar ruwa.

3. Lokacin da yawan zafin jiki ya tashi da 5-10 ° C, buɗe bawul ɗin shigar ruwa na matsakaicin sanyaya (Lura: Kada a buɗe bawul ɗin shigar ruwa da sauri. Lokacin da babban adadin ruwan sanyi ya gudana ta cikin mai sanyaya, zai haifar da hakan). wani dogon lokaci samu a saman na'urar musayar zafi "Supercooled Layer" tare da rashin ingancin thermal conductivity na Layer), sa'an nan kuma bude bawuloli masu shiga da fitarwa na zafi matsakaici don yin shi a cikin wani yanayi mai gudana, sa'an nan kuma biya. da hankali ga daidaita yawan kwararar matsakaicin sanyaya don kiyaye matsakaicin zafi a mafi kyawun yanayin aiki.

4. Idan lalata galvanic ya faru a gefe ɗaya na ruwan sanyi, ana iya shigar da sandar zinc a wurin da aka zaɓa.

5. Kafin ƙazantaccen matsakaici ya wuce ta cikin mai sanyaya, ya kamata a samar da na'urar tacewa.

6. Matsakaicin matsakaicin sanyaya ya kamata ya zama mafi girma fiye da matsa lamba mai sanyaya.

Bayanan kula

1. Kafin ƙazantaccen matsakaici ya wuce ta cikin mai sanyaya, yakamata a sami tacewa.

2. Zai fi kyau a shigar da shi a cikin madaidaicin madauri mai rarraba, saboda matsa lamba (ƙarshen wutsiya) ƙananan ne.

3. Lokacin aiki, duka madaukai na wurare dabam dabam suna buƙatar ƙãre don cimma babban inganci da kuma guje wa tsatsa a cikin madauki.

4. An haɗa matsakaicin sanyi da farko, sa'an nan kuma an haɗa matsakaicin zafi don cimma babban inganci da kuma guje wa lalatawar kewaye.

5. Matsakaicin matsakaicin sanyaya ya kamata ya fi na matsakaicin sanyaya.

6. Ruwan sanyaya yawanci ruwa ne (ana buƙatar tsari na musamman lokacin sanyaya da ruwan teku)

7. Shaye-shaye akai-akai da tsaftacewa a lokaci-lokaci.

8. A cikin lokacin sanyi, kuma mai sanyaya ba ya aiki, dole ne a zubar da ruwa don kauce wa daskarewa.

Na baya: DC SERIES FIN KYAKKYAWAN JINJIN TUBE MAI CANZA

Na gaba: Accumulator Mafitsara Accumulator